Move the valet/bypass switch on, then off again.ħ. Press and hold the selected choice a, b, or c above, until the siren emits a long "chirp" to confirm that programming of channel 1 was successful.Ħ.
Pressing both buttons simultaneously on the keychain transmitter.ĥ. Pressing button #2 on the keychain transmitter.Ĭ. Pressing button #1 on the keychain transmitter.ī. You can assign any of the three transmitter button functions listed below to channel 1Ī. Flip the valet switch on - off - on - off - on - then off.ģ.The dash LED will flash once, and the siren will "chirp" once, indicating the system is ready to accept programming for channel 1 or the arm/ disarm and panic functions.Ĥ. Enter the vehicle, and turn the ignition key to the "on" position.Ģ. This is also indicated by a long "chirp" from the siren.ġ. This is indicated by a long "chirp" from the siren.Īdditionally, any time the ignition key is turned off while programming, the system will immediately exit program mode. When the 15 second time limit is allowed to expire, the system will automatically exit program mode. It is important to remember that during programming, each individual step of the procedure must be executed within 15 seconds of the previous step. This is ONE (1) Prestige / Pursuit / Audiovox / Pro aftermarket keyless remote control transmitter key fob that will work with your vehicle's compatible Prestige installed RKE (remote keyless entry) system once programmed.
0 kommentar(er)
